Installing Raspbian Linux on Raspberry Pi On this topic Introduction Starting with v16, you can install 3CX on the latest Raspberry Pi, model 3B+. The latest version of 3CX can be installed on Raspbian Stretch, the Debian Linux distribution for the Raspberry Pi’s ARM architecture. Useful OS management functions can be performed from within the 3CX web management console or the Linux Command Line Interface (CLI) for advanced users. Prepare the SD card with Raspbian To install Raspbian on a micro-SD card:.
Jump to Install Raspbian - RetroPie can also be installed on most debian based distros. The Raspbian image can be installed the same way as the.
Download the Raspbian Stretch Lite image from. Extract the image (.img) file from the downloaded archive. Burn the Raspbian Stretch Lite image file via. Insert the written SD card in the Raspberry Pi memory card slot and power the device to boot. Wait for the boot process to complete and login with the default user “ pi ” and password “ raspberry ”. Change the default password for the “ pi ” user with the “ passwd ” command. You need to enter the old password and then specify twice the new password for the change to occur.
Note: Raspbian Linux requires the use of the “ sudo ” command to enable authorized users perform administrative tasks. For example, to check the package repositories for updates you need to issue the command “ sudo apt update ”. Issuing “ apt update ” without “ sudo ” prepended, results to denied permission for the command. Set Hostname To set the device hostname for the Pi:. Run the Raspbian configuration utility with the command.
This tutorial will show you how to download and install Dexter Industries software, DexterOS, Raspbian for Robots or CINCH on an SD Card. We show you how to install the image on the Raspberry Pi using a Mac and a PC. Before beginning, make sure you are using a 8GB microSD Card or larger (we recommend a 8 GB card). You will need:.
A minimum 8GB card to install this image. If you’re using a microSD Card, you may need a microSD card adapter (shown to the right) to fit the card into your computer. Files for download on Sourceforge. PC users should download the latest zip compressed file. Files in this directory are arranged and named by date.
Select the latest file, and hover your mouse over the file name. Choose the latest file that ends in “.zip”, click on it, and download the file. After the file is downloaded, there is no need to uncompress it. Next, make sure your SD Card adapter is unlocked. Next, put the micro SD card into your micro SD card adapter.
Put the SD card into your SD card reader. Insert the SD Card into your PC SD Card reader. Insert the SD Card into your PC SD Card reader. Next, we will install Etcher. Go to in your web browser.
Select “Etcher for PC” or “Download for Windows = xx”, on the big green button in the middle of the page. This should begin your download. The total size of the download is about 80 MB. This should download a file named something like `Etcher-1.0.0-beta.19-win32-x64.exe` Once the download is complete, double click on the “.exe” file and follow the directions to install Etcher on your PC.
Start etcher. The main Etcher program should appear. Now, find the file we downloaded earlier. Drag this file over to the blue “Select Image” button on the Etcher program. You can also click the blue “Select Image” button and find the file on your file directory. If you haven’t inserted your SD card at this point, please do. You should see it automatically pop up, and the red “Connect a Drive” button will disappear, replaced with information about your SD Card location.
Note a few things on Step 2 at this point. First, the disk location is showing. In our case it is `I: – 7.9 GB`. Your drive might be different, depending on your computer. Also, our SD Card is 8.0 GB, yours may be a different size. If you see a number that is much larger than your SD Card, stop and seek help. At this point, we’re ready to flash the image onto the SD card.
Press the blue “Flash!” button. After a few seconds, you should see progress. Note in the picture below the image has 9% written, and the speed is shown below the blue button. Depending on the SD card you are using and your PC, the time to flash the image may take some time.
Finally, after the image is flashed, the Etcher software will check to make sure it is properly written to the SD card (this is called Validating). The validation process should be much quicker than writing to the SD Card. You will see progress in the Validating progress bar. Finally the entire process should be complete. You will see a screen that looks like the following with “Flash Complete!” at the top. Remove the SD Card from your PC, Using a Mac First, download a copy of the image.
DexterOS:. Raspbian for Robots: from. Click “Files” and you should see a screen like below. Files for download on Sourceforge. Mac users should download the latest RAR compressed file. Files in this directory are arranged and named by date.
Select the latest file, and hover your mouse over the file name. Choose the latest file that ends in “.rar”, click on it, and download the file. After the file is downloaded, we can uncompress it. “Rar” files are compressed files, just like a zip file. Before beginning we need to uncompress the downloaded file.
We have used the App called ““. This app can be downloaded and installed in the App Store. If you have a decompression program on your Mac already, skip this step. Control-Click on the rar file and select “Open With – The Unarchiver”.
After unarchiving the file, you should see an image file, that ends with “.img”. Next, make sure your SD Card adapter is unlocked. The SD Card inserted into the Mac SD Card reader port. Next, put the micro SD card into your micro SD card adapter. Put the SD card into your Mac SD card reader. If your Mac does not have an SD Card Reader, you may need to use a USB SD Card reader.
Next, we will install Etcher. Go to in your web browser. Select “Etcher for Mac” or “Download for OSX = xx”, on the big green button in the middle of the page. This should begin your download. The total size of the download is about 80 MB. Once the download is complete, double click on the “.dmg” file and install Etcher on your Mac.
Start etcher. You may be prompted for your computer login information. The main Etcher program should appear. Now, find the unzipped “.img” file we uncompressed earlier.
Drag this file over to the blue “Select Image” button on the Etcher program. You can also click the blue “Select Image” button and find the “.img” file on your file directory. If you haven’t inserted your SD card at this point, please do. You should see it automatically pop up, and the red “Connect a Drive” button will disappear, replaced with information about your SD Card location.
Note a few things on Step 2 at this point. First, the disk location is showing. In our case it is “/dev/disk2”. Your disk# might be different, depending on your computer. Also, our SD Card is 8.0 GB, yours may be a different size.
If you see a number that is much larger than your SD Card, stop and seek help. At this point, we’re ready to flash the image onto the SD card. Press the blue “Flash!” button. After a few seconds, you should see progress. Note in the picture below the image has 9% written, and the speed is shown below the blue button. Depending on the SD card you are using and your Mac, the time to flash the image may take some time.
Finally, after the image is flashed, the Etcher software will check to make sure it is properly written to the SD card (this is called Validating). The validation process should be much quicker than writing to the SD Card. You will see progress in the Validating progress bar. Finally the entire process should be complete. You will see a screen that looks like the following with “Flash Complete!” at the top. Remove the SD Card from your Mac, place it into your Raspberry Pi, and you can begin using the new SD Card. Advanced: Using a PC and Win32 Disk Imager You can watch the video, or follow the written instructions below.
First, Download the image. We keep the latest compressed file on Sourceforge and Google Drive. You can download the file from one of the below links:. Next, un-compress the File. In windows, we use a free program called WinRAR,. Un-compress the downloaded.zip or.rar file. We will also need a program to install the image on the SD Card.
![]()
Download and install. You may need to run this program “As Administrator” by right clicking on the file, and selecting “Run as Administrator.” Large files can often be corrupted during download. You can check that your file was not corrupted by calculating the MD5 sum. Open Win32DiskImager and check the MD5 sum of the file. Check the MD5 sum by clicking “MD5 Hash” The hash of a complete, undamaged, and unzipped image is included with the zip download of the latest version of Raspbian for Robots. Next, we figure out the drive letter our SD card is registered as. Make sure the lock is off on your SD Card Adapter.
Insert the SD Card into your PC SD Card reader. Making progress on installation: the green bar moves across the screen. Note the MD5 Hash is for an earlier version of the image! If you downloaded the latest, you will not have a different Hash! At the end of the SD Card burn, an alert pops up to let you know that installation is complete!
Don’t remove the SD Card or stop the burn process until you see this dialog! Your First Time Running the New SD Card The first time you run the new SD Card in your Raspberry Pi, you should make a few adjustments. First login to your Raspberry Pi and pull up the command line. The image only took up about 3.5 GB of your SD Card, but you can expand the file system to use the entire SD Card. You will not be able to use the full 8 GB (or bigger if you have your own card) of the card unless you expand the image. You can do this by expanding the image to the full size of your SD Card.
First type the following to log in to your Raspberry Pi: ssh [email protected] Enter the password: robots1234 Then type: sudo raspi-config. You’ll see a little motion on your screen. Finally, after success, you select “Ok” by hitting the enter key. This will take you back to the main Raspberry Pi Configuration Menu. Update your Raspberry Pi Finally, make sure you get the latest version of the operating system. You can update your operating system and hardware profiles by connecting to the internet and typing in the following commands: sudo apt-get update sudo apt-get upgrade Questions? We’re here to help!
EDUCATORS Check out our page to learn about our Classroom Kits, Curriculum and Teacher Trial program.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |